Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-12
Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Parameter
process-id: OSPF process ID. If no process ID is specified, the command takes effect
on all OSPF processes.
Description
Use the display ospf abr-asbr command to view information on the routes to the Area
Border Router (ABR) and Autonomous System Border Router (ASBR) of OSPF.
Example
# Display the information of the OSPF ABR and ASBR.
<3Com > display ospf abr-asbr
OSPF Process 1 with Router ID 1.1.1.1
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination Area Cost Nexthop Interface
IA 2.2.2.2 0.0.0.0 10 10.153.17.89 ethernet0/0/0
Table 3-2 Description on the fields of the display ospf abr-asbr command
Field Description
Destination Router ID of ABR or ASBR
Area
The area to which both this router and
the ABR or the ASBR is connected
Cost Route cost
Nexthop Next hop address
Interface Output interface of this router
3.1.15 display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address mask ]
View
Any view