Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-13
Parameter
process-id: OSPF process ID. If no process ID is specified, the command takes effect
on all OSPF processes.
ip-address: Matched IP address, in dotted decimal notation.
mask: IP address mask in dotted decimal notation.
Description
Use the display ospf asbr-summary command to view summary about the
redistributed routes of OSPF.
If the parameters are not configured, the summary information of all redistributed routes
will be viewed.
Related command: asbr-summary.
Example
# Display the summary information of all OSPF redistributed routes.
<3Com > display ospf asbr-summary
The Count of Route is 0 OSPF Process 1 with Router ID 1.1.1.1
Summary Addresses
Total summary address count: 2
Summary Address
net : 168.10.0.0
mask : 255.254.0.0
tag : 1
status : Advertise
The Count of Route is 0
Summary Address
net : 1.1.0.0
mask : 255.255.0.0
tag : 100
status : DoNotAdvertise
The Count of Route is 0
Table 3-3 Description on the fields of the display ospf asbr-summary command
Field Description
net Destination segment
mask Mask
tag Tag