Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-16
Field Description
Timers
OSPF timers:
Hello: specifies the hello interval.
Dead: specifies the neighbor dead
interval
Poll: specifies the polling interval
Retransmit: specifies LSA
retransmission interval
Transmit Delay LSA transmission delay on the interface
3.1.17 display ospf cumulative
Syntax
display ospf [ process-id ] cumulative
View
Any view
Parameter
process-id: OSPF process ID. If no process ID is specified, the command takes effect
on all OSPF processes.
Description
Use the display ospf cumulative command to view the OSPF cumulative information.
Example
# Display the OSPF cumulative information.
<3Com > display ospf cumulative
Intra Area: 6 Inter Area: 0 ASE: 0 OSPF Process 1 with Router ID 1.1.1.1
Cumulations
IO Statistics
Type Input Output
Hello 225 437
DB Description 78 86
Link-State Req 18 18
Link-State Update 48 53
Link-State Ack 25 21
ASE: 1 Checksum Sum: FCAF
LSAs originated by this router
Router: 50 SumNet: 40 SumASB: 2
LSAs Originated: 92 LSAs Received: 33