Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-29
Severity level Description
critical
Critical errors
errors
The errors that need concerns but not
critical
warnings
Warning, there might exist some kinds of
errors.
notifications
The information should be concerned.
informational
Common prompt information
debugging
Debugging information
*: Indicates to select from multiple options, at least one and at most all.
Description
Use the info-center source command to add records to an information channel.
Use the undo info-center source command to remove the records from the
information channel.
For the specified module, by default,
The state of logging information output is on and the allowed information level is
informational.
The state of trapping information output is on and the allowed information level is
informational.
The state of debugging information output is off.
The system allocates one information channel for each output direction as shown in the
following table:
Table 1-8 Default information channels assigned to each direction
Output direction Information channel No. Default channel name
Console 0 console
Monitor terminal 1 monitor
Log host 2 loghost
Trap buffer 3 trapbuffer
Log buffer 4 logbuffer
SNMP 5 snmpagent
In addition, each information channel has a default record, where the module name and
number are default and 0xffff0000. But for different channels, the record may have