Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-20
Field Description
LS ACK: unknown LSA type
Link state acknowledgment packet:
unknown LSA type
LS REQ: neighbor state low Link state request (LS REQ) packet
LS REQ: empty request Link state request packet: empty request
LS REQ: wrong request
Link state request packet: erroneous
request
LS UPD: neighbor state low
Link state update packet: The states of
neighbors are synchronized.
LS UPD: newer self-generate LSA
Link state update packet: newer LSA
generated by itself
LS UPD: LSA checksum wrong
Link state update packet: LSA
checksum error
LS UPD: received less recent LSA
Link state update packet: received less
recent LSA
LS UPD: unknown LSA type
Link state update packet: unknown LSA
type
OSPF routing: next hop not exist Next hop of OSPF routing does not exist
DD: MTU option mismatch MTU option of DD packet is mismatched
ROUTETYPE: wrong type value
Route type: the value of the type is
wrong
3.1.19 display ospf interface
Syntax
display ospf [ process-id ] interface [ interface-type interface-number ]
View
Any view
Parameter
process-id: OSPF process ID. If no process ID is specified, the command takes effect
on all OSPF processes.
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display ospf interface command to view the OSPF interface information.
Example