Command Reference Guide

3Com Router 3000 Ethernet Family

Chapter 3 OSPF Configuration Commands

3Com Corporation

3-22

3.1.20 display ospf lsdb

Syntax

opaque { area-local | as | link-local } | router | summary ] [ ip-address ]

[ originate-router ip-address ] [ self-originate ]

View

Any view

Parameter

process-id: OSPF process ID. If no process ID is specified, the command takes effect

on all OSPF processes.

area-id: Area ID, a decimal integer in the range 0 to 4294967295, or an IP address.

brief: Brief database information.

asbr: Database information of Type-4 LSA (summary-Asbr-LSA).

ase: Database information of Type-5 LSA (AS-external-LSA).

network: Database information of Type-2 LSA (Network-LSA).

nssa: Database information of Type-7 LSA (NSSA-external-LSA)

opaque: Database information of Opaque LSA.

area-local: Database information of Type-10 Opaque-LSA.

as: Database information of Type-11 Opaque-LSA.

link-local: Database information of Type-9 Opaque-LSA.

router: Database information of Type-1 LSA (Router-LSA)

summary: Database information of Type-3 LSA (Summary-Net-LSA)

ip-address: Link state ID in IP address format.

originate-router ip-address: IP address of the router advertising LSA packet.

self-originate: Database information of self-originated LSA generated by local router..

Description

Use the display ospf lsdb command to view the database information about OSPF

connecting state.

Example

# Display the LSDB of OSPF.

<3Com > display ospf lsdb

OSPF Process 1 with Router ID 1.1.1.1

Link State Database