Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-25
Description
Use the display ospf nexthop command to view the information about the next-hop
Example
# Display the OSPF next-hop information.
<3Com > display ospf nexthop
OSPF Process 1 with Router ID 2.2.2.2
Next hops:
Address Type Refcount Intf Addr Intf Name
----------------------------------------------------------------------
10.0.0.2 Direct 3 10.0.0.2 Ethernet0/0/1
10.1.1.1 Neighbor 6 10.0.0.2 Ethernet0/0/1
60.0.0.1 Direct 3 60.0.0.1 Dialer0
80.0.0.1 Direct 3 80.0.0.1 Dialer1
90.0.0.1 Direct 3 90.0.0.1 Dialer3
Table 3-10 Description on the fields of the display ospf nexthop command
Field Description
Address Next hop address
Type Type of the next hop
Refcount
Reference count of the next hop, that is,
the number of the routes using this
address as the next hop
Intf Addr
The IP address of the outgoing interface
to the next hop
Intf Name The outgoing interface to the next hop
3.1.22 display ospf peer
Syntax
display ospf [ process-id ] peer [ brief ]
View
Any view
Parameter
process-id: OSPF process ID. If no process ID is specified, the command takes effect
on all OSPF processes.