Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-28
Field Description
ExStart
In this state, the router needs to decide
upon the initial DD sequence number,
ensuring that the link state information it
obtains is always up to date.
Exchange
In this state, the OSPF router exchanges
link state information with its neighbor by
sending DD packets.
Loading
In this state, the OSPF router sends link
state requests to the neighbor asking for
the more recent LSAs that have been
discovered (but not yet received) in the
Exchange state.
Full
It indicates that the neighboring routers
have synchronized their LSDBs.
3.1.23 display ospf request-queue
Syntax
display ospf [ process-id ] request-queue
View
Any view
Parameter
process-id: OSPF process ID. If no process ID is specified, the command takes effect
on all OSPF processes.
Description
Use the display ospf request-queue command to view the information about the
OSPF request-queue.
Example
# View the information about the OSPF request-queue.
<3Com > display ospf request-queue
The Router's Neighbors is
RouterID: 103.160.1.1 Address: 103.169.2.5
Interface: 103.169.2.2 Area: 0.0.0.1
LSID:129.11.25.0 AdvRouter:103.160.1.1 Sequence:80000001 Age:201
LSID:129.11.25.0 AdvRouter:103.160.1.1 Sequence:80000001 Age:201
LSID:129.11.25.0 AdvRouter:103.160.1.1 Sequence:80000001 Age:201
The Router's Neighbors is