Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-31
<3Com > display ospf routing
OSPF Process 1 with Router ID 1.1.1.1
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
10.110.0.0/16 1 Net 10.110.10.1 1.1.1.1 0
10.10.0.0/16 1 Stub 10.10.0.1 3.3.3.3 0
Total Nets: 2
Intra Area: 2 Inter Area: 0 ASE: 0 NSSA: 0
Table 3-15 Description on the fields of the display ospf routing command
Field Description
Destination Destination network segment
Cost Route cost
Type Type of the route
NextHop Next hop address
AdvRouter
Router ID of the router advertising the
route
Area Area ID
Intra Area Number of intra-area routes
Inter Area Number of inter-area routes
ASE Number of external routes
NSSA Number of NSSA routes
3.1.26 display ospf vlink
Syntax
display ospf [ process-id ] vlink
View
Any view
Parameter
process-id: OSPF process ID. If no process ID is specified, the command takes effect
on all OSPF processes.