Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 Basic Configuration Commands
3Com Corporation
1-3
1.1.3 clock timezone
Syntax
clock timezone zone_name { add | minus } time
undo clock timezone
View
System view
Parameter
zone_name: Time zone name, a string of 1 to 32 characters.
add: Positive offset to universal time coordinated (UTC) time.
minus: Negative offset to UTC time.
time: In the format of HH/MM/SS (hours/minutes/seconds).
Description
Use the clock timezone command to set the local time zone.
Use the undo clock timezone command to restore the local time zone to the default
UTC time zone.
After the configuration takes effect, you can view it by executing the display clock
command. The time applied to the log and debug information is the local time with time
zone and daylight saving time adjustment.
Related command: clock summer-time.
Example
# Set the name of the local time zone to Z5, five hours ahead of UTC time.
[3Com] clock timezone z5 add 05:00:00
1.1.4 command-privilege
Syntax
command-privilege level level view view command-key
undo command-privilege view view command-key
View
System view
Parameter
level level: Command level ranging from 0 to 3.