Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-31
1.3.17 info-center timestamp
Syntax
info-center timestamp { trap | debugging | log } { boot | date | none }
undo info-center timestamp { trap | debugging | log }
View
System view
Parameter
trap: Trap information
debugging: Debugging information.
log: Log information.
boot: Time elapses after the system boots. It is in the format of xxxxxx.yyyyyy, where
xxxxxx is the high 32 bits and yyyyyy the low 32 bits of the passed milliseconds.
date: Current system date and time, in the format of mm/dd/yyyy-hh:mm:ss.
none: No time stamp.
Description
Use the info-center timestamp command to set a time stamp format for the system
information output to the information channels except for the log host.
Use the undo info-center timestamp command to cancel the current configuration.
By default, the boot time stamp is used for debugging information while the date time
stamp is used for other types of information.
Example
# Set the time stamp format to boot for traps.
[3com] info-center timestamp trap boot
1.3.18 info-center timestamp loghost
Syntax
info-center timestamp loghost { date | no-year-date | none }
undo info-center timestamp loghost
View
System view