Command Reference Guide

3Com Router 3000 Ethernet Family

Chapter 3 OSPF Configuration Commands

3Com Corporation

3-40

For all the routers in the NSSA area, the command nssa must be used to configure the

area as NSSA.

Example

# Configure area 1 as NSSA.

[3Com -ospf-1] area 1

[3Com -ospf-1-area-0.0.0.1] network 10.110.0.0 0.255.255.255

[3Com -ospf-1-area-0.0.0.1] nssa

3.1.34 opaque-capability

Syntax

opaque-capability enable

undo opaque-capability

View

OSPF view

Parameter

None

Description

Use the opaque-capability enable command to enable the Opaque capability of

OSPF.

Use the undo opaque-capability command to disable the Opaque capability of OSPF.

Caution:

z By default, Opaque capability of OSPF is enabled.

z If the application based on Opaque LSA is enabled, for example, the area TE

capability is enabled, the Opaque capability cannot be disabled.

Example

# Enable Opaque capability.

[3Com -ospf-100] opaque-capability enable