Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-44
Use the undo ospf dr-priority command to restore the default value.
Interface priority determines the interface qualification when electing the “designated
router”. The interface with high priority is considered first when there is collision in
election.
Example
# Set the priority of the interface Ethernet1/0/0 to 8, when electing the DR.
[3Com ] interface Ethernet1/0/0
[3Com -Ethernet1/0/0] ospf dr-priority 8
3.1.39 ospf mib-binding
Syntax
ospf mib-binding process-id
undo ospf mib-binding
View
System view
Parameter
process-id: Number of OSPF process.
Description
Use the ospf mib-binding command, MIB operation can be bound on the specified
OSPF process.
Use the undo ospf mib-binding command to restore the default configuration.
MIB operation is always bound on the first process enabled by OSPF protocol. Use the
this command, MIB operation can be bound on other OSPF processes. Use the undo
ospf mib-binding command to cancel the binding configuration. MIB operation is
rebound automatically by OSPF protocol on the first enabled process.
By default, MIB operation is bound on the first enabled OSPF process.
Example
# Bind MIB operation on OSPF process 100.
[3Com ] ospf mib-binding 100
# Cancel MIB operation binding
[3Com ] undo ospf mib-binding