Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-32
Parameter
date: Specifies to use the time stamp format containing the year. With this keyword
specified, the log information will contain information about the year, for example, “May
27 10:29:38 2005 3com %%10SHELL/5/CMD(l): task:co0 ip:** user:** command:dis
this”.
no-year-date: Specifies to use the time stamp format without the year. With this
keyword specified, the log information will not contain information about the year, for
example, “May 27 10:29:54 3com %%10SHELL/5/CMD(l): task:co0 ip:** user:**
command:dis this”.
none: Specifies not to use time stamps. With this keyword specified, the log information
will not contain time information, for example, “3com %%10SHELL/5/CMD(l): task:co0
ip:** user:** command:dis this”.
Description
Use the info-center timestamp loghost command to set a time stamp format for the
system information output to the log host.
Use the undo info-center timestamp loghost command to restore the default.
By default, the date keyword applies.
Example
# Set the time stamp format to date for the system information output to the log host.
[Router] info-center timestamp loghost date
1.3.19 info-center trapbuffer
Syntax
info-center trapbuffer [ channel { channel-number | channel-name } | size buffersize ]
*
undo info-center trapbuffer [ channel | size ]
View
System view
Parameter
channel: Sets the channel for outputting information to the trapbuffer.
channel-number: Channel number in the range 0 to 9. The system has 10 channels.
channel-name: Channel name.
size: Sets trapbuffer size.
buffersize: Size of the trapbuffer (the information entries that can be accommodated).