Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 OSPF Configuration Commands
3Com Corporation
3-55
undo snmp-agent trap enable ospf [ process-id ] [ trap-type ]
View
System view
Parameter
process-id: OSPF process number. If no OSPF process number is specified, this
command is valid for all the current OSPF processes.
trap-type: Type of SNMP TRAP packet transmitted by OSPF. It can be the keyword in
the following table.
Table 3-17 SNMP TRAP type keywords
Keywords Description
ifauthfail
Enables the
InterfaceAuthenticationFailure trap
packets
ifcfgerror
Enables the InterfaceConfigError trap
packets
ifrxbadpkt
Enables the
InterfaceRecieveBadPacket trap
packets
ifstatechange
Enables the InterfaceStateChange trap
packets
iftxretransmit
Enables the
InterfaceTxRetransmitPacket trap
packets
lsdbapproachoverflow
Enables the LsdbApproachOverflow
trap packets
lsdboverflow Enables the LsdbOverflow trap packets
maxagelsa Enables the MaxAgeLsa trap packets
nbrstatechange
Enables the NeighborStateChange trap
packets
originatelsa Enables the OriginateLsa trap packets
virifauthfail
Enables the
VirtualInterfaceAuthenticationFailure
trap packets
virifcfgerror
Enables the VirtualInterfaceConfigError
trap packets
virifrxbadpkt
Enables the
VirtualInterfaceRecieveBadPacket trap
packets