Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-33
Description
Use the info-center trapbuffer command to enable the trap buffer, set its size and the
channel that outputs information to it.
Use the undo info-center trapbuffer command to cancel the current settings.
By default, information output to trap buffer is allowed and the trap buffer size is 256.
Only when the info-center is enabled can this command become effective.
By setting size of the trap buffer, you can allow the info-center output information to the
trap buffer.
Related command: info-center enable, display info-center.
Example
# Enable the info-center to send information to the trap buffer whose size is 30.
[3com] info-center trapbuffer size 30
1.3.20 reset logbuffer
Syntax
reset logbuffer
View
User view
Parameter
None
Description
Use the reset logbuffer command to clear information in the log buffer.
Example
# Clear information in the log buffer.
<3com> reset logbuffer
1.3.21 reset trapbuffer
Syntax
reset trapbuffer
View
User view