Command Reference Guide

3Com Router 3000 Ethernet Family

Chapter 4 Integrated IS-IS Configuration Commands

3Com Corporation

4-7

l2 and level-2: Both refer to the link state database of Level-2.

local: Displays the Contents of the Local LSP Database

verbose: Displays the verbose information of the link state database.

LSPID: Specifies the LSPID of the network-entity-title.

Description

Use the display isis lsdb command to view the link state database of the IS-IS.

Example

# Display the output information of display isis lsdb command.

<3Com > display isis lsdb

Lsp ID Sequence Holdtime A_P_O Checksum

1111.1111.1011.00-00 0x00000002 658 0_0_0 0x0b5e

4.1.8 display isis mesh-group

Syntax

display isis mesh-group

View

Any view

Parameter

None

Description

Use the display isis mesh-group command to view the IS-IS mesh group.

This command is used for displaying the configurations of the mesh-group of the

current router interface.

Example

# Add Interface serial1/0/0 and Interface serial2/0/0 running IS-IS into mesh group 100.

[3Com -Serial1/0/0] isis mesh-group 100

[3Com -Serial1/0/0] interface Interface serial2/0/0

[3Com -Serial2/0/0] isis mesh-group 100

# Display the information of IS-IS mesh-group.

[3Com -serial2/0/0] display isis mesh-group

Serial1/0/0 100

Serial2/0/0 100