Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Integrated IS-IS Configuration Commands
3Com Corporation
4-8
4.1.9 display isis peer
Syntax
display isis peer [ verbose ]
View
Any view
Parameter
verbose: When this parameter is configured, the area address carried in the Hello
message from the peer will be displayed. Otherwise, only the summary information will
be displayed.
Description
Use the display isis peer command to view IS-IS peer information.
The display isis peer verbose command yields not only all the outputs of the display
isis peer command, but also the area address, Up time and IP address of the directly
connected interface of the peer.
Example
# Display the output information of the display isis peer command.
<3Com > display isis peer
System ID Interface Circuit ID State HoldTime Type Pri
1111.1111.1031 Ethernet3/0/0 1111.1111.1031.01 Up 8s L2 64
1111.1111.1011 Ethernet3/0/1 1111.1111.1011.01 Up 7s L2 6
4.1.10 display isis routing
Syntax
display isis routing
View
Any view
Parameter
None
Description
Use the display isis routing command to view IS-IS routing information.