Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-35
View
User view
Parameter
None
Description
Use the terminal logging command to have the log information displayed on the
terminal.
Use the undo terminal logging command to disable displaying log information on the
terminal.
By default, log information can be displayed on the terminal.
Example
# Disable displaying log information on the terminal.
<3com> undo terminal logging
1.3.24 terminal monitor
Syntax
terminal monitor
undo terminal monitor
View
User view
Parameter
None
Description
Use the terminal monitor command to have the terminal display debugging /log/trap
information sent from the info-center.
Use the undo terminal monitor command to disable the terminal to display
debugging/log/trap information.
By default, terminal display is turned on for console users, allowing all prompt
messages to output to the console terminal.
For other types of terminal user, AUX, VTY, and TTY, terminal display is turned off by
default. To have the prompt messages for them output to the console terminal, you
need to configure the terminal monitor command.