Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Integrated IS-IS Configuration Commands
3Com Corporation
4-28
Example
# Set the current router to operate on Level-1.
[3Com ] isis
[3Com -isis] is-level level-1
4.1.32 log-peer-change
Syntax
log-peer-change
undo log-peer-change
View
IS-IS view
Parameter
None
Description
Use the log-peer-change command to configure to log the IS-IS adjacency changes.
Use the undo log-peer-change command to configure not to log the IS-IS adjacency
changes.
By default, IS-IS adjacency changes log is disabled.
After IS-IS adjacency changes log is enabled, the IS-IS adjacency changes will be
output on the configuration terminal until the log is disabled.
Example
# Configure to log the IS-IS adjacency changes on the current router.
[3Com -isis] log-peer-change
4.1.33 md5-compatible
Syntax
md5-compatible
undo md5-compatible
View
ISIS view
Parameter
None