Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 4 Integrated IS-IS Configuration Commands
3Com Corporation
4-31
Parameter
None
Description
Use the reset isis all command to reset all the IS-IS data.
This command is used when LSPs need refreshing immediately. For example, after
area-authentication-mode and domain-authentication-mode commands are
executed, the old LSP still remain on the router.
Related command: area-authentication-mode and domain-authentication-mode.
Example
# Clear all the IS-IS data.
<3Com > reset isis all
4.1.37 reset isis peer
Syntax
reset isis peer system-id
View
User view
Parameter
system-id: Specifiesy the system ID of IS-IS neighbor.
Description
Use the reset isis peer command to reset the IS-IS data of specified IS-IS neighbor.
This command is used when you want to reconfigure a certain neighbor.
Example
# Clear the IS-IS data of neighbor whose system ID is 0000.0c11.1111.
<3Com > reset isis peer 0000.0c11.1111
4.1.38 set-overload
Syntax
set-overload
undo set-overload