Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-1
Chapter 5 BGP Configuration Commands
5.1 BGP Configuration Commands
 Note:
For the commands defining routing policies in BGP, refer to the next chapter “IP
Routing Policy Configuration Commands”.
For the configuration examples and parameter explanation of VPNv4 and VPN
instance in BGP, refer to the "Multicast" module and "MPLS" module of this manual.
5.1.1 aggregate
Syntax
aggregate address mask [ as-set ] [ detail-suppressed ] [ suppress-policy
route-policy-name ] [ origin-policy route-policy-name ] [ attribute-policy
route-policy-name ]
undo aggregate address mask [ as-set ] [ detail-suppressed ] [ suppress-policy
route-policy-name ] [ origin-policy route-policy-name ] [ attribute-policy
route-policy-name ]
View
BGP view
Parameter
address: Address of the aggregated route, in dotted decimal notation.
mask: Network mask of the aggregated route, in dotted decimal notation.
as-set: Creates a route with AS segment.
detail-suppressed: Only advertises the aggregated route.
suppress-policy route-policy-name: Suppresses the individual routes selected, some
of which are not advertised.
origin-policy route-policy-name: Selects the originating routes used for aggregation.
attribute-policy route-policy-name: Sets the attributes of the aggregated route.