Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-9
verbose: Displays detailed debugging information.
Description
Use the debugging bgp command to enable debugging of specified BGP packets and
events.
Use the undo debugging bgp command to disable debugging of specified BGP
packets or events.
By default, debugging is disabled for any items.
System performance is influenced when debugging is enabled. Therefore, this
command should be used cautiously. Disable debugging of any item after gone
through.
Example
# Enable BGP packet debugging.
<3Com > debugging bgp packet
5.1.10 default-route imported
Syntax
default-route imported
undo default-route imported
View
BGP view
Parameter
None
Description
Use the default-route imported command to redistribute local default routes into BGP.
Use the undo default-route imported command to disable the redistribution.
By default, local default routes are not redistributed into BGP.
Example
# Redistribute local default routes into BGP.
[Router-bgp] default-route imported