Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-15
<3Com > display bgp peer
Peer AS-num Ver Queued-Tx Msg-Rx Msg-Tx Up/Down State
-------------------------------------------------------------------
1.1.1.10 300 4 0 3 5 00:00:10 Established
2.2.2.11 100 4 0 0 0 Never Idle
Table 5-5 Description on the fields of the display bgp peer command
Field Description
Peer IP address of the peer
AS-num AS number of the peer
Ver BGP version of the peer
Queued-Tx
Number of the packets in the transmit
queue
Msg-Rx
Number of messages received from this
peer
Msg-Tx Number of messages sent to this peer
Up/Down Up/down time of the peer
State Current state of the peer
# View the details of peer 1.1.1.10.
<3Com > display bgp peer 1.1.1.10 verbose
Peer: 1.1.1.10+1024 Local: 1.1.1.20+179
Type: Internal
State: Established Flags: <>
Expiring Time: 00:02:49
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
Options: <>
Peer Version: 4 Peer ID: 1.1.1.10 Local ID: 8.8.8.8
Active Holdtime: 180s, Keepalive: 60s
Group Bit: 0 Send state: in sync
Last traffic (seconds): Received 11 Sent 17 Checked 17
Input messages: Total 3 Updates 2 Octets 439
Output messages: Total 5 Updates 3 Octets 264
Peer capabilities:
Route refresh: advertised and received
Ipv4-family Unicast: advertised and received
Ipv4-family Multicast: advertised and received
Ipv4-family VPNv4: advertised and received