Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-16
Configuration within the peer :
route-policy specified in export policy : 2
Table 5-6 Description on the fields of the display bgp peer verbose command
Field Description
Peer: 1.1.1.10+1024
IP address of the peer and the port
number for TCP connection
Local: 1.1.1.20+179
Type: Internal BGP version of the peer
State: Established Current state of the peer
Expiring Time: 00:02:49
Displays the remaining lifetime of the
peer. This field is displayed only when
the state of the peer is Established
Last State: OpenConfirm
The last state of the peer before
transitting to the current state
Last Event: RecvKeepAlive
The last event that triggers state
transition
Peer capabilities: The negotiated peer cababilities
Route refresh:
Route refreshing cabability. Advertised
means route advertisement is allowed
and Received means route updates can
be received.
Ipv4-family Unicast: IPv4 unicast address familiy capacity
Ipv4-family Multicast: IPv4 multicast address familiy capacity
Ipv4-family VPNv4: IPv4 VPN address familiy capacity
5.1.17 display bgp routing
Syntax
display bgp [ multicast | vpnv4 { all | route-distinguisher route-distinguisher |
vpn-instance vpn-instance-name } ] routing [ ip-address mask | statistic ]
View
Any view
Parameter
multicast: Displays the MBGP routing information in BGP routing table.
all: Displays all VPNv4 routing information.