Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-23
D - damped H - history S - aggregate suppressed
B - balance
Dest/Mask Source Damping-limit Origin As-path
-----------------------------------------------------------------
#D 11.1.0.0 133.1.1.2 1:20:00 IGP 200
Table 5-9 Description on the fields of the display bgp routing dampened command
Field Description
Flags
State flags:
# – valid
^ – best
D – damped
H – history
I – internal (IGP)
S – aggregate suppressed (suppressed)
B – balance
#D Valid and damped routes
Dest/Mask The route to this destination network segment is damped.
Source Next hop of the route
Damping-limit Time after which the route can recover from the damped state
Origin attribute of the route, which can take on one of the following
values:
IGP
Indicates that a route is interior to the AS.
Aggregate routes and the routes defined using the
network command are considered IGP routes.
EGP
Indicates that a route is learned from the exterior
gateway protocol (EGP).
Origin
INC
Short for INCOMPLETE. It indicates that the origin of a
route is unknown and the route is learned by other
means.
As-path
AS-path attribute of the route. It records all ASs traversed by the
route for avoiding routing loops.
5.1.23 display bgp routing different-origin-as
Syntax
display bgp [ multicast ] routing different-origin-as
View
Any view