Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-39
Parameter
slot-number: Slot number.
Description
Use the display device command to view information on the hardware configurations
of the system, including in-position state of the RPU, NPU, interface cards, power
module, and fan module, the operating state of the interface cards, power module, and
fan module, as well as the offline state of RPU and NPU.
If no slot is specified, the basic information about all the facilities in position is displayed.
If a slot is specified, only details about the slot are displayed, including records of the
reset times and causes.
Example
# Display basic information about the facilities on the router.
<3com> display device
Slot # Type Online Status
0 RPU Present Normal
6 PWR Present Normal
7 FAN Present Normal
Table 1-11 Description on the fields of the display device command
Field Description
Slot # Slog number
Type Name of the hardware unit
Online
Indicates whether the hardware unit is
present. A value of Present indicates
that the unit has been installed correctly.
Status Status of the hardware unit
1.4.4 display schedule reboot
Syntax
display schedule reboot
View
Any view
Parameter
None