Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-26
Field Description
Origin attribute of the route, which can take on one of the following
values:
IGP
Indicates that a route is interior to the AS.
Aggregate routes and the routes defined using the
network command are considered IGP routes.
EGP
Indicates that a route is learned from the exterior gateway
protocol (EGP).
Origin
INC
Short for INCOMPLETE. It indicates that the origin of a
route is unknown and the route is learned by other means.
As-path
AS-path attribute of the route. It records all ASs traversed by the
route for avoiding routing loops.
5.1.25 display bgp routing peer { advertised | received }
Syntax
display bgp routing peer peer-address { advertised | received } [ network-address
[ mask ] | statistic ]
View
Any view
Parameter
peer-address: Specifies the peer to be displayed.
advertised: Routing information advertised by the specified peer.
received: Routing information the specified peer received.
network-address: IP address of the destination network segment.
mask: Mask of the destination network segment.
statistic: Displays the statistics for the route.
Description
Use the display bgp routing peer command to view the routing information the
specified BGP peer advertised or received.
Related command: display bgp peer.
Example
# View the routing information advertised by BGP peer 10.10.10.1.
[3Com ] display bgp routing peer 10.10.10.1 advertised
Flags: # - valid ^ - active I - internal