Command Reference Guide

3Com Router 3000 Ethernet Family

Chapter 5 BGP Configuration Commands

3Com Corporation

5-27

D - damped H - history S - aggregate suppressed

B - balance

Dest/mask Next -Hop Med Local-pref Origin As-path

*> 10.10.10.0/24 0.0.0.0 INC

For description on the output of the command, see Table 5-7.

5.1.26 display bgp routing peer dampened

Syntax

display bgp routing peer peer-address dampened [ statistic | ip-address ]

View

Any view

Parameter

peer-address: IP address of the BGP peer.

statistic: Statistics about dampened routes.

ip-address: Details about the specified dampened route.

Description

Use the display bgp routing peer dampened command to view the information about

the dampened routes received from the specified peer.

Example

# Display the information about the dampened routes receved from the specified peer.

<3Com >display bgp routing peer 133.1.1.1 dampened

Flags: # - valid ^ - active I - internal

D - damped H - history S - aggregate suppressed

B - balance

Dest/Mask Source Damping-limit Origin Path

--------------------------------------------------------------------------

#D 10.0.0.0/8 133.1.1.1 28:30 INC 200

# Display statistics about the dampened routes received from the specified peer.

<3Com >display bgp routing peer 133.1.1.1 dampened statistic

Received damping routes total: 1

# Display the details about the dampened routes to the 10.0.0.0 segment received from

the specified peer.