Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-28
<3Com > display bgp routing peer 133.1.1.1 dampened 10.0.0.0
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Dest/Mask Source Damping-limit Origin Path
--------------------------------------------------------------------------
--
#D 10.0.0.0/8 133.1.1.1 28:00 INC 200
Table 5-11 Description on the fields of display bgp routing peer dampened
Field Description
Flags
State flags:
# – valid
^ – best
D – damped
H – history
I – internal (IGP)
S – aggregate suppressed (suppressed)
B – balance
Dest/Mask Destination address/mask
Source Source IP address
Damping-limit Time after which the route can recover from the damped state
Origin attribute of the route, which can take on one of the following
values:
IGP
Indicates that a route is interior to the AS.
Aggregate routes and the routes defined using the
network command are considered IGP routes.
EGP
Indicates that a route is learned from the exterior gateway
protocol (EGP).
Origin
INC
Short for INCOMPLETE. It indicates that the origin of a
route is unknown and the route is learned by other means.
As-path
AS-path attribute of the route. It records all ASs traversed by the
route for avoiding routing loops.
5.1.27 display bgp routing peer regular-expression
Syntax
display bgp routing peer peer-address regular-expression text