Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-38
View
BGP view, VPNv4 view, VPN instance view
Parameter
group-name: Specifies the name of the peer group.
Description
Use the peer advertise-community command to enable the transmission of
community attributes to a peer group.
Use the undo peer advertise-community command to cancel the existing
configuration.
By default, community attributes are not transmitted to any peer group.
Related command: if-match community-list, apply community.
Example
# Enable the transmission of community attributes to peer group test.
[3Com -bgp] peer test advertise-community
5.1.39 peer allow-as-loop
Syntax
peer { group-name | peer-address } allow-as-loop [ number ]
undo peer { group-name | peer-address } allow-as-loop
View
BGP view, VPNv4 view, VPN instance view
Parameter
group-name: Specifies the name of the peer group.
peer-address: Specifies the IP address of the peer.
number: Specifies the repeating times of the local AS number. The range is 1 to 10.
Description
Use the peer allow-as-loop command to configure the repeating times of the local AS
number.
Use the undo peer allow-as-loop command to cancel the configuration.
Related command: display current-configuration, display bgp routing peer, and
display bgp routing group.