Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 System Maintenance and Management
Commands
3Com Corporation
1-41
View
User view
Parameter
None
Description
Use the reset alarm urgent command to clear all the stored alarms.
Example
# Clear all the stored alarms.
<3com> reset alarm urgent
1.4.7 schedule reboot at
Syntax
schedule reboot at time [ date ]
View
User view
Parameter
time: Reboot time of the router, in the format of hh:mm (hours:minutes). hh is in the
range 0 to 23, and mm is in the range 0 to 59.
date: Reboot date of the router, in the format of mm/dd/yyyy or yyyy/mm/dd where mm
is the month of the year in the range 1 to 12, dd is the day of the month, the range of
which depends on month, and yyyy is the year in the range 2000 to 2099.
Description
Use the schedule reboot at command to enable the scheduled reboot function of the
router and schedule the reboot time and date.
By default, scheduled reboot is disabled.
If a future date is specified, the router will reboot as scheduled with about one minute’s
tolerance.
If no date is specified, two cases are involved:
z If the time is set behind the current time, the router will reboot at the time of that
day;
z If the configured time is ahead of the current time, the router will reboot at that time
the next day.