Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-49
Description
Use the peer public-as-only command to configure not to carry the private AS number
when transmitting BGP updates.
Use the undo peer public-as-only command to configure to carry the private AS
number when transmitting BGP updates.
By default, the private AS number is carried when BGP updates are transmitted.
Generally, BGP transmits BGP updates with the AS number (either the public AS
number or the private AS number). To enable some outbound routers to ignore the
private AS number when transmitting updates, configure not to carry the private AS
number when transmitting BGP updates.
Example
# Configure not to carry the private AS number when transmitting BGP updates to the
peer named test.
[3Com -bgp] peer test public-as-only
5.1.53 peer reflect-client
Syntax
peer group-name reflect-client
undo peer group-name reflect-client
View
BGP view, VPNv4 view
Parameter
group-name: Specifies the name of the peer group.
Description
Use the peer reflect-client command to configure a peer group as the route reflector
client.
Use the undo peer reflect-client command to cancel the existing configuration.
By default, no route reflector is in AS.
Generally speaking, it is not necessary to configure this command for the peer group
because IBGP peers are in the default group. A single peer peer-address reflect-client
command should be used to configure the route reflector clients.
Related command: reflect between-clients and reflect cluster-id.