Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-51
5.1.55 peer route-update-interval
Syntax
peer group-name route-update-interval seconds
undo peer group-name route-update-interval
View
BGP view, VPNv4 view, VPN instance view
Parameter
group-name: Specifies the name of the peer group.
seconds: Specifies the minimum interval of sending UPDATE message. The range is 0
to 600 seconds. By default, the interval is 5 seconds for internal peer groups, and 30
seconds for external peer groups.
Description
Use the peer route-update-interval command to configure the interval for a peer
group to advertise route updates.
Use the undo peer route-update-interval command to restore the default value.
Example
# Configure BGP peer group test to advertise route updates at intervals of 10 seconds.
[3Com -bgp] peer test as-number 100
[3Com -bgp] peer test route-update-interval 10
5.1.56 peer shutdown
Syntax
peer { group-name | peer-address } shutdown
undo peer {group-name | peer-address } shutdown
View
BGP view, VPN instance view
Parameter
group-name: Specifies the name of the peer group.
peer-address: Specifies the IP address of the peer.