Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 BGP Configuration Commands
3Com Corporation
5-58
5.1.65 reset dampening
Syntax
reset dampening [ network-address [ mask ] ]
View
User view
Parameter
network-address: Network IP address related to clearing dampening information.
mask: Network mask.
Description
Use the reset dampening command to clear the dampening information and flap
statistics of a route and release the suppression of a suppressed route.
Related command: dampening and display bgp routing dampened.
Example
# Clear the dampening information of the route to network 20.1.0.0, and release the
suppression of the suppressed route.
<3Com > reset dampening 20.1.0.0 255.255.0.0
5.1.66 summary
Syntax
summary
undo summary
View
BGP unicast view, BGP multicast view, VPN instance view
Parameter
None
Description
Use the summary command to configure automatic aggregation of sub-network routes.
Use the undo summary command to disable automatic aggregation.
By default, no automatic aggregation of sub-network routes is executed.
After the summary is configured, BGP cannot receive sub-network routes redistributed
from IGP, so the amount of the routing information can be reduced.