Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 6 IP Routing Policy Configuration
Commands
3Com Corporation
6-2
undo apply community
View
Routing policy view
Parameter
aa:nn: Community number.
no-export-subconfed: Indicates not to advertise matched routes outside the AS.
no-advertise: Indicates not to advertise matched routes to any peer.
no-export: Indicates not to advertise routes outside the AS but to other sub ASs.
additive: Community attributes of additional routes.
none: Community attributes of the deleted routes.
Description
Use the apply community command to set BGP community attributes in route-policy.
Use the undo apply community command to cancel the configured BGP community
attributes.
By default, no BGP community attributes are set.
Configure BGP community attributes after matching the route-policy conditions.
Related command: ip community-list, if-match community-list, route-policy,
display bgp routing community.
Example
# Display how to configure one route-policy named setcommunity, whose node serial
number is 16 and match mode is permit, and enter route policy view to set match
conditions and attribute modification actions to be executed.
[3Com ] route-policy setcommunity permit node 16
[3Com -route-policy] if-match as-path 8
[3Com -route-policy] apply community no-export
6.1.3 apply cost
Syntax
apply cost value
undo apply cost
View
Routing policy view