Command Reference Guide
3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 6 IP Routing Policy Configuration
Commands
3Com Corporation
6-5
Parameter
level-1: Redistributes the matched route to Level-1 area.
level-2: Redistributes the matched route to Level-2 area.
level-1-2: Redistributes the matched route to both Level-1 and Level-2 area.
Description
Use the apply isis command to apply the level of a matched route to be redistributed to
Level-1, Level-2 or Level-1-2.
Use the undo apply isis command to remove the setting clause.
By default, no apply clause is defined.
Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip
next-hop, if-match cost, if-match tag, route-policy, apply ip-address, apply cost,
apply origin, and apply tag.
Example
# Define an apply clause to set the redistributed route to Level-2.
[3Com -route-policy] apply isis level-2
6.1.7 apply local-preference
Syntax
apply local-preference local-preference
undo apply local-preference
View
Routing policy view
Parameter
local-preference: Newly set local preference.
Description
Use the apply local-preference command to apply the local preference of route
information.
Use the undo apply local-preference command to cancel the apply clause.
Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip
next-hop, if-match cost, if-match tag, route-policy, apply ip-address, apply
local-preference, apply origin, and apply tag.










