Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 7 Route Capacity Configuration
Commands
3Com Corporation
7-1
Chapter 7 Route Capacity Configuration
Commands
7.1 Route Capacity Configuration Commands
7.1.1 display memory
Syntax
display memory [ limit ]
View
Any view
Parameter
limit: Displays the lower limit and safety value of the router idle memory.
Description
Use the display memory command to view the memory setting and state information
related to the routing capacity.
It includes available memory and state information about connections such as times for
disconnecting connections, times for reestablishing connections and whether the
current system is in the emergent state or not.
Example
# Display the current memory setting and state information.
<3Com > display memory limit
Current memory limit configuration information:
memory safety: 30
memory limit: 20
memory auto-establish enabled
Free Memory: 73855332 (Byte)
The state information about connection:
The times of disconnect: 0
The times of reconnect: 0
The current state: Normal