Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 7 Route Capacity Configuration
Commands
3Com Corporation
7-2
The information displayed by this command includes the router memory limit, the size
of the idle memory, the times of connection disconnecting, the times of connection
reestablishment and the current state.
The displayed information is described specifically in the following table:
Table 7-1 Description of the information displayed by the display memory limit
command
Field Description
memory safety: 30
The safety value of the router memory is
30Mbytes.
memory limit: 20
The lower limit of the router memory is
20Mbytes.
memory auto-establish enabled
The system allows recovering the
connection automatically. (If the
automatic recover is disabled, the
"auto-establish disabled" will be
displayed.)
Free Memory: 73855332 (Byte)
The size of the current idle memory is
73855332 bytes, that is, 73.855M.
The times of disconnect: 0
The times of the connection
disconnecting of the router is 0.
The times of reconnect: 0
The times of the connection
re-establishment of the router is 0.
The current state: Normal
The current state is normal. (If entering
the emergent state, the system will
display "Exigency" .)
7.1.2 memory auto-establish disable
Syntax
memory auto-establish disable
View
System view
Parameter
None
Description
Use the memory auto-establish disable command to disable the function of restoring
the connections of all the routing protocols (even if the idle memory reduces to a safety
value).