Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 Auto Detect Configuration Commands
3Com Corporation
2-1
Chapter 2 Auto Detect Configuration Commands
2.1 Basic Auto Detect Configuration Commands
2.1.1 detect-group
Syntax
detect-group group-number
undo detect-group group-number
View
System view
Parameter
group-number: Number for the detect group, in the range 1 to 100.
Description
Use the detect-group command to create a detect group and enter its view.
Use the undo detect-group command to remove a specified detect group.
Example
# Create a detect group numbered 10.
<3com> system-view
System View: return to User View with Ctrl+Z.
[3com] detect-group 10
[3com-detect-group-10]
2.1.2 detect-list
Syntax
detect-list list-number ip address ip-address [ nexthop ip-address ]
undo detect-list list-number
View
Detect group view
Parameter
list-number: Sequence number for an address to be probed in the detect group, in the
range 1 to 100.