Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 7 Route Capacity Configuration
Commands
3Com Corporation
7-3
By default, when the idle memory of the router recovers to a safety value, connections
of all the routing protocols will always recover (when the idle memory of the router
reduces to a lower limit, the connection will be disconnected forcibly).
Use the memory auto-establish disable command to disable the above function.
Thus, connections of all the routing protocols will not recover when the idle memory of
the router recovers to a safety value. In this case, you need to restart the routing
protocol to recover the connections.
You shall use the command cautiously.
Related command: memory auto-establish enable, memory { safety | limit }, and
display memory limit.
Example
# Disable to recover the connections of all the protocols automatically when the current
router memory resumes.
[3Com ] memory auto-establish disable
[3Com ]
%3/13/2003 15:47:2-RM-5-S1-RTLOG:You have changed the model of connection
7.1.3 memory auto-establish enable
Syntax
memory auto-establish enable
View
System view
Parameter
None
Description
Use the memory auto-establish enable command to resume connections of all the
routing protocols when the idle memory of the router recovers to a safety value.
By default, when the idle memory of the router recovers to a safety value, connections
of all the routing protocols will always recover (when the idle memory of the router
reduces to a lower limit, the connection will be disconnected forcibly).
Use the memory auto-establish disable command to disable the above function. Use
the memory auto-establish enable command to enable the above function again. By
default, the function is always enabled.
Related command: memory auto-establish disable, memory { safety | limit }, and
display memory limit.