Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 Auto Detect Configuration Commands
3Com Corporation
2-2
ip-address: IP address to be probed.
nexthop ip-address: Specifies a next hop IP address for reaching the IP address to be
probed, that is, the address where auto detect starts.
Description
Use the detect-list command to add an IP address to the detect group and assign the
address a detecting sequence number.
Use the undo detect-list command to remove an IP address from the detect group.
You can add up to 100 IP addresses to a detect group and specify their relationship by
using the option command. The router probes these IP addresses in the ascending
order of their assigned sequence numbers.
Related command: option.
Example
# Add IP address 202.13.1.55 with sequence number 1 to detect group 10, taking IP
address 1.1.1.1 as the next hop address.
<3com> system-view
System View: return to User View with Ctrl+Z.
[3com] detect-group 10
[3com-detect-group-10] detect-list 1 ip address 202.13.1.55 nexthop 1.1.1.1
2.1.3 display detect-group
Syntax
display detect-group [ group-number ]
View
Any view
Parameter
group-number: Number of the detect group to be displayed, in the range 1 to 100.
Description
Use the display detect-group command to display configuration information about a
specified detect group or all detect groups.
Example
# Display configuration information about detect group 1.
[3com] display detect-group 1
detect-group 1 :
detect loop time(s): 15