Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 IGMP Configuration Commands
3Com Corporation
2-4
2.1.4 display igmp local
Syntax
display igmp local
View
Any view
Parameter
local: Information of the local interface which receives and sends multicast data.
Description
Use the display igmp local command to view the IGMP configuration and running
information of the local interface which receives and sends multicast data.
Example
# Display the IGMP configuration and running information of the local interface which
receives and sends multicast data.
<3Com> display igmp local
Mcast_Out_IF (127.0.0.6):
IGMP is enabled on interface
Current IGMP version is 2
No IGMP group reported
Mcast_In_IF (127.0.0.5):
IGMP is disabled on interface
2.1.5 igmp enable
Syntax
igmp enable
undo igmp enable
View
Interface view
Parameter
None
Description
Use the igmp enable command to enable IGMP on an interface.