Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 2 IGMP Configuration Commands
3Com Corporation
2-13
Example
# Specify Ethernet1/0/0 to use IGMP Version 1.
[3Com-Ethernet1/0/0] igmp version 1
2.1.16 reset igmp group
Syntax
reset igmp group { all | interface interface-type interface-number { all | group-address
[ group-mask ] } }
View
User view
Parameter
all: All IGMP groups.
interface interface-type interface-number: Interface type and interface number.
group-address: IGMP group address.
group-mask: Network segment mask of group address.
Description
Use the reset igmp group command to delete the IGMP group joined on the interface.
The deletion of the group does not affect its joining again.
Example
# Delete all the IGMP groups on all interfaces.
<3Com> reset igmp group all
# Delete all the IGMP groups on the interface Ethernet0/0/0.
<3Com> reset igmp group interface ethernet0/0/0 all
# Delete the group 225.0.0.1 on the interface Ethernet0/0/0.
<3Com> reset igmp group interface ethernet0/0/0 225.0.0.1
# Delete the IGMP groups ranging between the network segment 225.1.1.0 and
225.1.1.255 on the interface Ethernet0/0/0.
<3Com> reset igmp group interface ethernet0/0/0 225.1.1.0 255.255.255.0