Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 PIM Configuration Commands
3Com Corporation
3-5
Example
# Configure C-RP policy on C-BSR router. Only permit 1.1.1.1/32 to act as C-RP which
only serves the group range 225.1.0.0/16.
[3Com-pim] crp-policy 3100
[3Com-pim] quit
[3Com] acl number 3100
[3Com-acl-adv-3100] rule 0 permit ip source 1.1.1.1 0 destination 225.1.0.0
0.0.255.255
3.1.5 debugging pim common
Syntax
debugging pim common { all | event | packet | timer }
undo debugging pim common { all | event | packet | timer }
View
User view
Parameter
all: All the common debugging information of PIM.
event: Debugging information of common PIM event.
packet: Debugging information of PIM Hello message.
timer: Debugging information of common PIM timer.
Description
Use the debugging pim common command to enable common PIM debugging
functions.
Use the undo debugging pim common command to disable the debugging functions.
By default, common PIM debugging functions are disabled.
Example
# Enable all common PIM debugging functions.
<3Com> debugging pim common all
3.1.6 debugging pim dm
Syntax
debugging pim dm { alert | all | mrt | timer | warning | { recv | send } { all | assert |
graft | graft-ack | join | prune } }