Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 PIM Configuration Commands
3Com Corporation
3-6
undo debugging pim dm { alert | all | mrt | timer | warning | { recv | send } { all |
assert | graft | graft-ack | join | prune } }
View
User view
Parameter
all: All the debugging information of PIM-DM.
alert: Debugging information of PIM-DM interoperation event.
mrt: Debugging information of PIM-DM multicast routing table.
timer: Debugging information of PIM-DM timer.
warning: Debugging information of PIM-DM warning message.
recv: Debugging information of PIM-DM receiving packets.
send: Debugging information of PIM-DM sending packets.
all: All packet types.
assert: Packet type, assert packet.
graft: Packet type, graft packet.
graft-ack: Packet type, graft acknowledgment packet.
join: Packet type, join packet.
prune: Packet type, prune packet.
Description
Use the debugging pim dm command to enable PIM-DM debugging functions.
Use the undo debugging pim dm command to disable the debugging functions.
By default, PIM-DM debugging functions are disabled.
Example
# Enable all PIM-DM debugging functions
<3Com> debugging pim dm all
3.1.7 debugging pim sm
Syntax
debugging pim sm { all | mbr | mrt | msdp | timer | verbose | warning | { recv | send }
{ assert | bootstrap | crpadv | jp | reg | regstop } }
undo debugging pim sm { all | mbr | mrt | msdp | timer | verbose | warning | { recv
| send } { assert | bootstrap | crpadv | jp | reg | regstop } }