Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 PIM Configuration Commands
3Com Corporation
3-7
View
User view
Parameter
mbr: Debugging information of PIM-SM multicast boundary router event.
mrt: Debugging information of PIM-SM multicast routing table.
msdp: Functions between PIM-SM and MSDP.
timer: Debugging information of PIM-SM timer.
warning: Debugging information of PIM-SM warning message.
recv: Debugging information of PIM-SM receiving packets.
send: Debugging information of PIM-SM sending packets.
assert | bootstrap | crpadv | jp | reg | regstop: Packet type.
Description
Use the debugging pim sm command to enable PIM-SM debugging functions.
Use the undo debugging pim sm command to disable the debugging functions.
By default, PIM-SM debugging functions are disabled.
The command debugging pim sm register-proxy is only suitable for the distributed
router. This command can enable the debugging when an interface board acts as a
proxy of main control board to send register packets.
Example
# Enable all PIM-SM debugging functions
<3Com> debugging pim sm all
3.1.8 display pim bsr-info
Syntax
display pim bsr-info
View
Any view
Parameter
None
Description
Use the display pim bsr-info command to view Bootstrap Router (BSR) information.
Related command: c-bsr and c-rp.