Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 PIM Configuration Commands
3Com Corporation
3-9
Item Description
PIM query interval is 30 seconds
The sending interval of Hello message is
30 seconds.
PIM DR (designated router) is
10.10.1.20
IP address of DR is 10.10.1.20.
3.1.10 display pim neighbor
Syntax
display pim neighbor [ interface interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Interface type and interface number.
Description
Use the display pim neighbor command to view the PIM neighbor information.
Example
# Display the PIM neighbor information of the interface Ethernet1/0/0 on the router.
<3Com> display pim neighbor ethernet 1/0/0
Neighbor's Address Interface Name Uptime Expires
10.10.1.10 Ethernet1/0/0 00:41:59 00:01:16
3.1.11 display pim routing-table
Syntax
display pim routing-table [ *g [ group-address [ mask { mask-length | mask } ] ]
[ incoming-interface { interface-type interface-number | null } ] [ dense-mode |
sparse-mode ]
display pim routing-table [ **rp [ rp-address [ mask { mask-length | mask } ] ]
[ incoming-interface { interface-type interface-number | null } ] [ dense-mode |
sparse-mode]
display pim routing-table [ source-address [ mask { mask-length | mask } ]
[ group-address [ mask { mask-length | mask } ] ] [ incoming-interface { interface-type
interface-number | null } ] [ dense-mode | sparse-mode ]