Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 3000 Router Series
881882883884885886887888889890
3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 PIM Configuration Commands
3Com Corporation
3-10
View
Any view
Parameter
**rp: (*, *, RP) route entry.
*g: (*, G) route entry.
group-address: Address of the multicast group.
source-address: IP address of the multicast source.
incoming-address: Route entry of the specified incoming interface.
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display pim routing-table command to view the contents of the PIM multicast
routing table.
Related command: display multicast routing-table.
Example
# Display the contents of the PIM multicast routing table on the router.
<3Com> display pim routing-table
PIM-SM Routing Table
Total 0 (S,G) entry, 2 (*,G) entries, 0 (*,*,RP) entry
(*, 224.0.1.40), RP 20.20.20.30
Protocol 0x20: PIMSM, Flag 0x2003: RPT WC NULL_IIF
UpTime: 00:17:25, never timeout
Upstream interface: Null, RPF neighbor: 0.0.0.0
Downstream interface list:
Ethernet0/0/0, Protocol 0x1: IGMP, never timeout
(*, 225.1.1.1), RP 20.20.20.30
Protocol 0x20: PIMSM, Flag 0x2003: RPT WC NULL_IIF
UpTime: 00:08:45, never timeout
Upstream interface: Null, RPF neighbor: 0.0.0.0
Downstream interface list:
Ethernet0/0/0, Protocol 0x1: IGMP, never timeout
Matched 0 (S,G) entry, 2 (*,G) entries, 0 (*,*,RP) entry