Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 PIM Configuration Commands
3Com Corporation
3-13
3.1.15 pim dm
Syntax
pim dm
undo pim dm
View
Interface view
Parameter
None
Description
Use the pim dm command to enable PIM-DM.
Use the undo pim dm command to disable PIM-DM.
By default, PIM-DM is disabled.
Once PIM-DM is enabled on an interface, PIM-SM cannot be enabled on the same
interface and vice versa.
Example
# Enable PIM-DM on the interface Ethernet1/0/0.
[3Com] multicast routing-enable
[3Com] interface ethernet1/0/0
[3Com-Ethernet1/0/0] pim dm
3.1.16 pim neighbor-limit
Syntax
pim neighbor-limit limit
undo pim neighbor-limit
View
Interface view
Parameter
limit: Upper limit of PIM neighbor number on an interface, ranging from 0 to 128.